Mimaki UJV55-320

Mimaki UJV55-320 - 3.2M Wide UV Inkjet Printer KL, Selangor, Malaysia Distributor

The UJV55-320, 3.2 m-wide LED-UV inkjet printer, offers high cost performance and expands your business.
  • White ink adds value to prints
    - The combination of white and color inks adds values to transparent media print.
    - UV-curable inks form thicker ink films compared to other inks, which reduce light transmission through the colored area, even with backlit signage, enabling finishing with vivid coloring. Moreover, white ink also enables three-layer printing with color + white + color. This feature ensures a beautiful color reproduction for backlit signs at any time of day and night.
  • Built-in LED light allows an operator to check a quality of printing for backlit signage during printing operation
    LED light is installed to the front side of the machine. An operator can check a quality of printing under almost the same conditions as being used for the backlit signage.
  • High productivity leveraged by the 3.2-m-wide LED-UV printer
    - The new model does not require drying, allowing processing and operation immediately after printing, thereby reducing the total operation time.
    - High printing speed of 60m2/h is achieved on banner material in a high-speed mode (300 × 600 dpi, 4 pass).
    - The 3.2-m width allows twin roll print capability.
  • Solutions for uninterrupted printing operations
    Nozzle check unit (NCU) automatically detects and cleans clogged nozzles. Moreover, the nozzle recovery system (NRS) uses only good nozzles as substitutes, if the clogged nozzles are not recovered after cleaning. These functions maintain constant printing and reduce waste printing due to defective nozzles.
  • Mimaki’s superior print-image quality control technology
    - Mimaki Fine Diffusion 1 (MFD1), a patented dithering technique, is incorporated in the Mimaki RIP RasterLink6Plus software. * Patent number / JPN: 5230816
    - Mimaki Advanced Pass System 4 (MAPS4) reduces banding and uneven color printing.
    - The “waveform control” technique ensures ink droplet landing accuracy.


Printhead On-demand piezo head
(Printheads are arranged in four staggered lines)
Print resolutions 300dpi, 600dpi, 900dpi, 1,200dpi
Head gap 4 gap settings (1.7mm / 1.9mm / 2.6mm / 3.3mm)
Maximum print width 3,200 mm (126 in)
Maximum media width 3,250 mm (127.9 in)
(When roll holders are used:1,620mm (63.7 in) × 1)
(Twin-roll printing with roll holders: 1,524 mm (60 in) × 2)
Minimum media width 210 mm (8.2 in)
(Twin-roll printing: 210 mm (8.2 in) × 2)
Ink Type/ Color LUS-120 (C, M, Y, K, Lc, Lm, W)
Packaging 1L ink bottle
Each ink color can be filled up to 3 liters in the ink supply unit.
Media thickness 1.0 mm or less
Roll outer diameter Large drive shaft: Φ250 mm (9.8 in) or less
Roll holder: Φ180mm (7 in) or less
Roll weight Large drive shaft: 100kg (220.5 lb) or less
Roll holder: 18kg (39.7 lb) or less
Interface Ethernet 1000BASE-T / USB2.0
Power supply AC200 - 240V±10% 50/60Hz ±1Hz 18A or less
Power consumption 4.3kW or less
Temperature: 20–30 °C (68–86 °F)
Humidity: 35–65 %Rh (No condensing)
Dimensions (W×D×H) 5,410 mm × 995 mm × 1,440 mm (213 in × 39.2 in × 56.7 in)
(Dimensions of the ink supply unit is excluded.)
5,680 mm × 1,220 mm × 1,440 mm (223.6 in × 48 in × 56.7 in)
(Dimensions of the ink supply unit is included.)
Weight 910kg (2,006 lb) (Weight of the ink supply unit is included.)

Ink set

C M Y K Lc Lm W
  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of their respective owners.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

 Inquiry - Mimaki UJV55-320