No. 5, Jalan Mega 2/1,
Kawasan Perindustrian
Mega 2, 43500 Semenyih,
Selangor, Malaysia.
![]() |
Previous | 2 / 2 | Next |
Affordably priced but technologically advanced.
Achieve the highest return on your investment.
CG-60SRIII | CG-100SRIII | CG-130SRIII | ||
---|---|---|---|---|
Acceptable sheet width |
90 - 740 mm (3.5 - 29.1') |
90 - 1,250 mm (3.5 - 49.2') |
90 - 1,550 mm (3.5 - 61.0') |
|
Effective cutting area *1 | 606 mm × 51 M (23.9' x 167.3') | 1,070 mm × 51 M (42.1' x 167.3') | 1,370 mm × 51 M (53.9' x 167.3') | |
Maximum speed | Cutting: 70 cm/s, Moving: 100 cm/s | |||
Adjustable speed range |
1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9'/s (0.4'/s step adjustment) 1 - 70 cm/s (5 cm/s step adjustment): 0.4 - 27.6'/s (2.0'/s step adjustment) |
|||
Mechanical resolution | X direction: 2.5 μm¡¢Y direction: 5 μm | |||
Command resolution | 25 μm or 10μm£¨ MGL-IIc£© / 100 μm, 50 μm£¨ MGL-Ic1£© | |||
Repeatability *2 | ± 0.2 mm / 2 M | |||
Effective Repeatability *3 | 586 mm × 2 M | 1,050 mm × 2M | 1,350 mm × 2M | |
Maximum pressure | 500g | |||
Range of down pressure |
Cutter | 10 - 20 g£¨2 g step£©, 20 - 100 g£¨5 g step£©, 100 - 500g£¨10g step£© | ||
Pen | 10 - 20 g£¨2 g step£©, 20 - 100 g£¨5 g step£©, 100 - 150g£¨10 g step£© | |||
Acceptable sheet *3 | Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet | |||
Acceptable tool *4 | Cutter, Ball-point pen | |||
Type of command | MGL-IIC / MGL-Ic1 | |||
Interface | USB2.0¡¢RS-232C¡¢Ethernet | |||
Receiver buffer size | 27 MB Standard (When sorting, 17 MB) | |||
Operational environment | 5 - 35 degC (41 - 95 degF), 35 - 75 £¥ (Rh), Non-condensation | |||
Power requirement | AC 100 V - 240 V, 145 VA or less | |||
Dimensions£¨W×D×H£© |
1,030 × 430 × 335 mm (40.6 × 16.9 × 13.2') 1,030 × 430 × 1,185 mm *5 (40.6 × 16.9 × 46.7') *5 |
1,530 × 580 × 1,150 mm (60.2 × 22.8 × 45.3') |
1,830 × 580 × 1,150 mm (72.0 × 22.8 × 45.3') |
|
Weight | 24kg (52.9 lb.) | 41kg (90.4 lb.) | 46kg (101.4 lb.) | |
Stand | Optional equipment | Standard equipment | Standard equipment |
*1: Maximum sheet feeding length differs depending on the software.
*2: Except for media expansion and contraction due to temperature.
*3: Operated with Mimaki specified media, cutter and cutting conditions.
Thickness of rubber and its cutting speed are limited. Guaranteed accuracy environment: Temperature 12 - 25 degC (53.6 - 77 degF), Humidity 45-65%
*4: Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*5: When equipped with the optional stand (OPT-0231)